Notes ยท 2026-10-20

Aliasing in saturation: what it is and how to hear it

You add drive and the sound gets brighter, then a harsh fizz appears that does not sound like harmonics. That fizz is aliasing.

What happens

Saturation and clipping are nonlinear: they create new frequencies, harmonics, above the ones you put in. A digital system can only represent frequencies up to half the sample rate (the Nyquist frequency, 24 kHz at 48 kHz). New harmonics above that do not vanish. They fold back into the audible range at frequencies unrelated to the music. Those are alias components, and because they are not harmonically related to the note, they sound dissonant and metallic.

How to hear and see it

  1. Open a spectrum analyser after the saturator.
  2. Feed it a single sine, around 5 to 8 kHz, with moderate to high drive.
  3. Harmonics land at multiples of the note, evenly spaced. Aliases show up as extra lines between them, at odd positions that move in the opposite direction when you change the pitch.
  4. Sweep the sine upwards: true harmonics go up, aliases move down.

How it is reduced

  • Oversampling runs the nonlinear stage at a higher sample rate (2x, 4x, up to 16x), so harmonics have room above the audible range, and then filters them out before returning to the original rate. It works for any shape, costs CPU and adds a little latency.
  • Antiderivative antialiasing (ADAA) changes the maths of the nonlinear function so it behaves as if sampled much more finely. It is a cheap complement to oversampling, especially for hard clipping and folding.
  • Filtering the input: taking out very high frequencies before the saturator also removes what would alias.

When aliasing is wanted

Sometimes the grit is the effect. Bit-crush and sample-rate-reduction sounds depend on it. Just make it a choice.

The Grains Saturator uses ADAA together with oversampling, and its window shows the transfer curve and the harmonics.

Related