Manual

Install, licence, and a quick start for every plugin.

Pick a plugin

Each plugin has a short quick start: which preset to begin with, four to six steps to a good setting, what the main controls do, and what to try if it sounds wrong.

General

Install

There is no installer. You get a ZIP file, you unzip it and you copy the plugin files. The steps below are for Windows 11, 64-bit (Windows 10 should work but is not tested). On a Mac, see Install on macOS below.

  1. Download the ZIP file from your Lemon Squeezy receipt or from the email that came with it.
  2. Unzip it. Inside is one folder called Bastard Engineering, with the plugin files (.vst3), the licence agreement and a short readme.
  3. Copy the folder Bastard Engineering into C:\Program Files\Common Files\VST3. Windows asks for administrator rights. If you prefer another place, any folder that your host scans for VST3 plugins works too.
  4. Rescan plugins in your host. The plugins appear in its plugin list under the names on this site, for example Equalizer or Compressor.
  5. Open a plugin. It starts a free 14-day trial. To enter a key, see Licence and trial.

The whole series, or one plugin

The series ZIP holds all fifteen plugins in that one folder. The ZIP of a single plugin holds the same folder name with one plugin in it. When you copy a second ZIP, the folders merge: say yes when Windows asks to merge, and replace files with the same name.

Update or remove

To update, close your host, then copy the new folder over the old one and replace the files. A plugin file that the host has loaded cannot be replaced. To remove a plugin, close your host and delete its .vst3 file from the folder. Click Deactivate in the Licence window first if you want to free the place for another computer.

Install on macOS

macOS 11 or newer, Apple silicon or Intel (every ZIP is one universal build). There is no installer: you copy the plugin file into your Library folder. The plugins are signed with our Apple Developer ID and notarized by Apple, so macOS opens them without a warning; the first check needs an internet connection.

  1. Download the ZIP file and unzip it. Inside are the plugin file (.vst3 for VST3, .component for Audio Unit), the licence agreement and a short readme.
  2. In Finder choose Go, then Go to Folder. Paste ~/Library/Audio/Plug-Ins/VST3 for VST3 or ~/Library/Audio/Plug-Ins/Components for AU. If the folder does not exist, create it.
  3. Copy the plugin file into that folder. No password is needed in your own Library. To make the plugins available to every user of the Mac, use the same folder under the top-level /Library instead.
  4. Restart your host and rescan plugins (Logic Pro scans Audio Units on its own). The plugins appear under the names on this site, for example Equalizer or Compressor.
  5. Open a plugin. It starts a free 14-day trial. To enter a key, see Licence and trial.

Which format

Take Audio Unit (AU) for Logic Pro and GarageBand, VST3 for REAPER, Cubase, Studio One and most other hosts. Ableton Live loads both. You can install both formats; the host then lists the plugin twice.

Update or remove

Close your host, copy the new plugin file over the old one and replace it. To remove a plugin, delete its file from the folder. Click Deactivate in the Licence window first if you want to free the place for another computer. Licence and trial data stay in ~/Library/Bastard Engineering and ~/Library/Application Support/Bastard Engineering.

macOS says the file cannot be opened

Download the ZIP again from the original link and unzip it with Finder (double-click). Plugins that were altered or damaged on the way are blocked by macOS. If the message stays, write to support and include your macOS version and host.

Licence and trial

Every plugin works fully for 14 days without a key. The days start the first time you open any of the plugins and count for all of them together. Nothing is sent to us for the trial.

Enter your key

  1. Open any plugin and click the gear icon at the right end of the plugin header.
  2. Choose Licence.... The Licence window opens under the gear.
  3. Paste your key into the field (it says Licence key) and click Activate.

The same window has Deactivate (frees this computer's place so you can use the key on another one), Buy a licence (opens the shop) and Privacy policy. A key can be active on up to 3 computers at a time.

What the window shows

  • Trial: N days left while the trial runs.
  • Trial expired after the 14 days. From then on the plugin stops processing: your audio passes through unchanged and nothing is deleted. Enter your key and it works again at once.
  • Licensed when the key is active. If the licence needs renewing, the window asks you to connect to the internet once and open it again.

You do not have to open the window to know where you stand: during the trial a small label at the bottom left of every plugin window shows the days left (it turns amber in the last three days). When the trial has ended it turns red and says that the sound passes through unprocessed. Click the label to open the Licence window. When the plugin is licensed the label disappears.

If you bought single plugins, enter each key in its own plugin; the keys live side by side on the computer and Deactivate in one plugin frees only that plugin's key. A bundle key unlocks every plugin of the series; deactivating it frees the computer for all of them.

Open the Licence window when a project suddenly sounds different: an expired trial is the first thing to check. Activation sends your key, a one-way fingerprint of your computer, the computer name and the plugin version to our licence server, and nothing else. See Licence and activation and Privacy.

Knobs, hints and shortcuts

  • Drag a knob to change it. Hold Shift while dragging for fine steps.
  • Double-click a knob to type a value.
  • Ctrl-click or Alt-click a knob to reset it to its default. Right-click a knob for a menu with Reset to default and Enter value.
  • The mouse wheel turns a knob a step at a time; with Shift the step is smaller.
  • The bar along the bottom of the window explains whatever is under the mouse. There are no pop-up tooltips.

Presets and A/B

Presets

  • Click the preset name in the middle of the header to open the preset list. Type to filter, move with Up and Down and press Enter, or click a preset. The arrows next to the name step to the previous and next preset.
  • A star marks a favourite. Init sets every control to its factory value.
  • Click the save icon in the header, or Save... in the list, to store your own preset.
  • More... in the list lets you make a preset a favourite, rename or delete your own presets, use the current settings as the Default, and show the presets folder.
  • The gear menu has Load Default preset.

A/B

The two buttons A and B in the header hold two complete settings. Click B, change the sound, and click A and B to compare. The copy button next to them copies A to B (or B to A).

Undo and redo

The two arrows in the header undo and redo your changes of the controls. They are in the header of every plugin, next to the A and B buttons. Undo steps back through your changes in the order you made them, and redo brings a step back.

Match and Delta

Both buttons are at the bottom right of every plugin window (the Gate has Delta only). They are meant for listening, and they are not saved with your project.

  • Match levels the processed sound to the loudness of the input, so that switching Bypass on and off compares the sound and not the volume. The button shows the current correction in dB.
  • Delta plays only what the effect adds or removes (the processed signal minus the original).

The quick way: Alt-click the Bypass button. It bypasses the plugin at equal loudness in one gesture. Alt-click again to end the comparison. In the Gate, Alt-click is a plain click, because Match would undo what a gate does.

Bypass

The Bypass button at the bottom right turns the effect off without clicks. It is also available to the host as a parameter, so your host's own bypass works as well. Alt-click it to compare at equal loudness (see Match and Delta).

Resizing the window

Open the gear menu and choose Interface size: 75%, 100%, 125%, 150%, 175% or 200%. You can also drag the corner of the window to any size; the plugin scales its interface to fit.

Formats and hosts

  • Format: VST3 for Windows 11, 64-bit (Windows 10 should work but is not tested); VST3 and Audio Unit (AU) for macOS 11 or newer, Apple silicon and Intel. There is no AAX, CLAP or 32-bit version.
  • Tested in: REAPER. The plugins follow the VST3 standard, so other hosts that load VST3 plugins should work. We have not tested them yet, so if one gives you trouble, write to us.
  • Channels: mono and stereo tracks.
  • macOS: new in version 1.0.12. The plugins pass Apple's own plugin check (auval) and the pluginval test suite. We have not yet tested them in every host on a Mac, so if one gives you trouble, write to us.

Troubleshooting

The plugins do not appear in my host

On Windows, check that the folder Bastard Engineering sits in C:\Program Files\Common Files\VST3 (or in a folder your host scans) and that it contains the .vst3 files. On a Mac, check that the plugin file sits in ~/Library/Audio/Plug-Ins/VST3 (VST3) or ~/Library/Audio/Plug-Ins/Components (AU). Then rescan plugins in the host, and if the host has a cache, clear it or rescan in full.

Windows says I cannot copy the folder

Copying into Program Files needs administrator rights. Confirm the Windows prompt. If you cannot, put the folder somewhere else and add that folder to the VST3 search paths in your host.

A plugin file cannot be replaced

The host still has it loaded. Close the host, copy again, and start the host.

A project suddenly sounds different

Open any plugin, then gear icon, then Licence.... If it says Trial expired, the plugin is passing the audio through unchanged. Enter your key.

My key does not work

Copy it again without spaces before or after. Check that you are online when you click Activate. If the window says all places are used, click Deactivate on an old computer, or remove it on your licence page (the link is in your purchase email).

Crackling or dropouts

Raise the buffer size of your audio interface. Plugins with a Lookahead control add latency, which your host can compensate for. If you still hear crackling, send us your CPU, buffer size and host.

A control does something I did not expect

Read the hint in the bar at the bottom of the window, and look at the quick start of that plugin in this manual. Click Init in the preset list to go back to the factory values.

Support

Write to support@bastardengineering.com. Tell us the plugin name and version (it is at the top of the gear menu), your host and its version, your Windows or macOS version and what happened. A short project file or a screenshot helps. We usually answer within two working days. More on the support page.

Plugin version 1.0.12.