Grains Resonance Suppressor

A resonance suppressor that finds and turns down ringing and harsh peaks as they happen.

30 seconds to a good setting

Start from the preset Smooth Vocal Resonances (Vocals).

Click the preset name in the header to open the list. Init gives you the factory values.

  1. Put the plugin on the track and choose Smooth Vocal Resonances for a voice, Harsh Guitar for guitars or Mix Bus Gentle for a mix.
  2. Play the part and turn Depth up until the harsh ringing is smaller. Depth 0 is off. The graph shows the reduction from the top.
  3. Set Selectivity: low reduces broad humps as well, high touches only narrow peaks.
  4. Set Sharpness: low makes wide, soft dips, high makes narrow notches.
  5. Drag the Low and High limits on the screen: nothing below Low and nothing above High is touched.
  6. Alt-click Bypass to compare at equal loudness. Lower Mix to blend some of the original back in.

Main controls

Depth
How much, and how small, a resonance is turned down. 0 is off.
Selectivity and Sharpness
Which peaks count, and how narrow the dips are.
Attack and Release
How fast a new resonance is turned down, and how fast the reduction recovers. Release all the way down is Auto.
Low and High
The range that is processed.
Mode and Link
Stereo, or Mid / Side, and how much of the reduction both channels share.
Mix and Output
Blend of the processed and the original signal, and the level after.

If it sounds wrong

If the sound gets dull or lifeless, lower Depth, raise Selectivity, narrow the Low and High range to the area that is the problem, or lower Mix. This plugin delays the sound by a fixed 43 ms (46 ms at 44.1 kHz). Your DAW compensates for it, so tracks stay in time, but do not use it on a track you are monitoring live while recording.

Other presets to try

  • Harsh Vocal (Vocals)
  • Harsh Guitar (Guitar)
  • Acoustic Body (Guitar)
  • Mix Bus Gentle (Mix)
  • Ringing Drums (Drums)

The same for every plugin: presets and A/B, Match and Delta, licence and trial, troubleshooting.