Grains Equalizer
A parametric EQ with up to 16 bands, and bands that can also react to the level.
30 seconds to a good setting
Start from the preset Vocal Presence (Vocals).
Click the preset name in the header to open the list. Init gives you the factory values.
- Put the plugin on the track. Click the preset name in the header and choose Vocal Presence for a voice, De-Mud for a muddy mix, or Init for a flat start.
- Play the loudest part. Alt-click the Bypass button (bottom right): it bypasses at equal loudness, so you judge the sound and not the volume. Alt-click again to end the comparison.
- Drag a node on the graph: sideways changes the frequency, up and down changes the gain.
- Turn the mouse wheel over a node to change its Q (how narrow it is). Alt plus wheel steps through the band types.
- Double-click an empty spot on the graph to add a band (up to 16). Right-click a node to choose its Type, Slope or Stereo (Stereo, Left, Right, Mid or Side).
- Switch Auto Gain on if you want the loudness to stay steady while you boost and cut.
Main controls
- Type and Slope
- The filter shape of the selected band and how steep its sides are. Slope runs from 6 to 96 dB per octave.
- Frequency, Gain, Q
- Where the band works, how much it boosts or cuts, and how wide it is.
- Comp
- Makes the band dynamic: it opens a plate with Range, Threshold, Ratio, Attack and Release. Off makes the band static again.
- Scale
- Scales the gain of all bands at once. 0% is flat, 100% is as you set it, 200% is double.
- Output and Auto Gain
- Level after the EQ. Turning Output by hand switches Auto Gain off.
If it sounds wrong
If it sounds wrong, click Bypass on single bands to find the one that hurts, or turn on Delta (bottom right) to hear only what the EQ adds or removes. Scale at 0% shows the sound without any of your bands.
Other presets to try
- De-Mud (Mix)
- Kick Shape (Drums)
- Bass Tighten (Bass)
- Air Lift (Mix)
The same for every plugin: presets and A/B, Match and Delta, licence and trial, troubleshooting.
