Grains Noise Gate

A noise gate with three styles, a sidechain filter and a Listen switch.

30 seconds to a good setting

Start from the preset Tight Kick (Drums).

Click the preset name in the header to open the list. Init gives you the factory values.

  1. Put the plugin on the track and choose Tight Kick, Snare Gate or Vocal Breaths, whichever is closest to your sound.
  2. Choose a Style: Classic (hard, fully open or closed), Smooth (a gentle expander, Ratio sets how gentle) or Ducker (turns the signal down while the sidechain is loud).
  3. Play the track and drag the dashed Threshold line above the noise or bleed and below the hits. The OPEN strip lights while the gate is open.
  4. Set Range, the amount by which a closed gate turns the signal down. A smaller range sounds more natural.
  5. Set Attack, Hold and Release so the hits start and end naturally. Raise Lookahead if the start of a hit is cut.
  6. To keep cymbal or rumble out of the detector, turn on Listen and set SC Low Cut and SC High Cut until you hear mostly the sound you want to key on.

The Gate has no Match button: Match would level the output to the input and cancel what a gate does.

Main controls

Threshold
The gate opens above this level.
Range
How much the closed gate turns the signal down.
Hysteresis
The gate closes this many dB below the threshold (the dotted CLOSE line). It stops chattering.
Attack, Hold, Release
How fast it opens, how long it stays open at least, and how fast it closes. Release all the way down is Auto.
Lookahead
Opens just before the hit so transients are not cut. It adds latency.
SC Low Cut and SC High Cut
Filters on the detector only, not on your sound.

If it sounds wrong

If the gate chatters, raise Hysteresis or Hold. If the start of notes is cut, add Lookahead or shorten Attack. If it sounds too abrupt, use Smooth, or reduce Range.

Other presets to try

  • Snare Gate (Drums)
  • Tom Cleaner (Drums)
  • Vocal Breaths (Vocals)
  • Guitar Noise (Guitar)
  • Kick Ducks Bass (Ducking)

The same for every plugin: presets and A/B, Match and Delta, licence and trial, troubleshooting.