Grains Saturator
A saturator with seven styles and up to five bands that you can split and process separately.
30 seconds to a good setting
Start from the preset Subtle Warmth (Mix).
Click the preset name in the header to open the list. Init gives you the factory values.
- Put the plugin on the track and choose Subtle Warmth for a small change, or Bus Thickener for a mix or group.
- Choose a Style: Tube (even harmonics, thick and warm), Tape (soft and rounded), Warm (gentle colour), Clip (hard clipping), Fold (wavefolding), Rectify (fuzzy octave-up) or Crush (bit reduction, lo-fi).
- Turn Drive up until you hear the character you want, then back a little.
- Use Tone to tilt the saturated sound darker (left) or brighter (right), and Bias for more even-harmonic grit.
- Switch Auto gain on, so the loudness stays steady while you turn Drive and you judge the sound and not the volume. Then Alt-click Bypass to compare.
- For different treatment of lows and highs, click Add band (up to 5 bands) and drag the crossover. Set Mix for the amount.
Main controls
- Style
- The saturation curve. Every band has its own style.
- Drive
- How hard the band hits the saturation curve.
- Bias
- Moves the curve off-centre for asymmetric, even-harmonic grit.
- Tone
- Tilts the saturated sound darker or brighter.
- Mix and Output
- Dry/wet balance of the band, and the level after processing. Turning Output by hand switches Auto gain off.
- Solo, Bypass, Add band
- Hear one band alone, let one band pass clean, or split the highest band in two.
If it sounds wrong
If it sounds harsh or fizzy, lower Drive, move Tone to the left, lower Mix, or choose Tube or Warm. If the lows get muddy, use a second band and give the lows less Drive.
Other presets to try
- Tape-Style Glue (Mix)
- Bus Thickener (Mix)
- Hard Edge (Drums)
- Vocal Air (Vocals)
- 808 Growl (Bass)
- Clean Low, Hot Top (Multiband)
The same for every plugin: presets and A/B, Match and Delta, licence and trial, troubleshooting.
